-
NAMZ Universal "Plug-n-Play" Tour Pack Power Tap Harness, Easy Removal (Road King® and Electra® Glide 1997-2013) (Road Glide® 1998-2009) (Road Glide® Ultra® through 2013) (Street Glide® 2006-2009). Allows rider to easily remove tour pack without taking off the seat. -
Our hard-wired Illuminator™ provides running light, brake light and turn signal functions into (1) wire for left and (1) wire for right side rear turn signals. This modules also has a built-in Load Equalizer to prevent rapid flashing turn signals. FITS: (Sportster 1986-2013), (Dyna 1986-2011), (Softail, FXR 1986-2010), (Road King®, Electra® Glide 1985-2013) (Road Glide® 1998-2009) (Street Glide® 2006-2009) (V-Rod 2001-2017) -
Our Plug-n-Play Illuminator™ provides running light, brake light and turn signal functions to NEW rear turn signals. This modules also has a built-in Load Equalizer to prevent rapid flashing turn signals. Comes with NEW rear fender wiring harness. FITS: (Scout 2014 to Current) when replacing rear taillight and turn signals) -
Indian® Scout® Handlebar Control Xtension Harness lengthens the OEM harness 18", Fits 2015-2020 Indian® Scout® and Indian® Scout Bobber® Models ONLY. Kit comes with OEM color wire, terminals are pre-installed, heat shrink and (3) OEM connectors, requires to be soldered on.- Fitment:
- 2015-2020 Indian® Scout®
- 2015-2020 Indian® Scout Bobber®
- Connectors are preinstalled on one end
- Lengthens the OEM harness 18″ for any size handlebar
- Will allow the use for up to 20″ tall handlebars
- Requires removal of OEM connectors and soldered into place
- All our kits use OEM color matching wire, OEM connectors and MIL-SPEC machine crimped terminals and are proudly assembled by hand in Pennsylvania.
- Made in the USA 🇺🇲
- Fitment:
-
Dual 7" Road Glide® HeadlAMP® complete with black powder-coated aluminum bracket, stainless steel hardware and 100% plug-n-play wiring harness. The aggressive look captured with (1) clear lens LED (running light) and (1) yellow lens LED (both work on high beam) boasting over 8000 lumens per LED. Simple to install and built to last. -
NAMZ Handlebar Control Complete Harness 48-inch long, 100% plug-n-play, fits ALL 2014-2022 Dresser, Police, Trike Models and 2023-Up Road Glide Limited, Road King Special and Ultra Limited Models. These models use our complete replacement part number NHCX-C235 or the extension version part number, NHCX-KM15) -
Sportster Replacement LED Taillight, SMOKE LENS Fits: Roadster, Forty-Eight, Iron, 883L, 1200L, 883N, 1200N and 1200V Models. -
NAMZ 1/4" and 5/16" ID Copper Fuel Line Hose Clamps, Qty. 6 -
NAMZ 1/4" and 5/16" ID Silver Hose Clamps, Qty. 6 -
NAMZ 1/4" and 5/16" ID Black Fuel Line Hose Clamps, Qty. 6 -
NAMZ 1/4" and 5/16" ID Black Fuel Line Hose Clamps, Qty. 6 -
NAMZ 1/4" and 5/16" ID CHROME Fuel Line Hose Clamps, Qty. 6 -
NAMZ 3/8" ID Copper Oil Line Hose Clamps, Qty. 6 -
NAMZ 3/8" ID Silver Hose Clamps, Qty. 6 -
NAMZ 3/8" ID Black Oil Line Hose Clamps, Qty. 6 -
NAMZ 3/8" ID Brass Hose Clamps, Qty. 6 -
NAMZ 3/8" ID CHROME Oil Line Hose Clamps, Qty. 6 -
25' Roll of 1/4" ID Stainless Braided Hose. -
25' Roll of 5/16" ID Stainless Braided Hose.
-
25' Roll of 3/8" ID Stainless Braided Hose.
-
25' Roll of 1/4" ID Copper Braided Hose. -
25' Roll of 5/16" ID Copper Braided Hose.
-
25' Roll of 3/8" ID Copper Braided Hose.
-
25' Roll of 1/4" ID Brass Braided Hose. -
25' Roll of 5/16" ID Brass Braided Hose.
-
25' Roll of 3/8" ID Brass Braided Hose.
-
Our NSSS-2501 stainless steel braiding opens to a maximum of 1/2″ ID. Universal applications and will braid tightly against 1/16″ up to 1/2″ ID. -
The NSSS-2502 stainless braiding opens to a maximum 3/4" ID. Universal applications and will braid tightly against 3/16" up to 3/4" ID.
-
Our NCS-2501 copper braiding opens to a maximum of 1/2" ID. Universal applications and will braid tightly against 1/16" up to 1/2" ID. -
The NCS-2502 copper braiding opens to a maximum of 3/4" ID. Universal applications and will braid tightly against 3/16" up to 3/4" ID.
-
Our NBS-2501 brass braiding opens to a maximum of 1/2" ID. Universal applications and will braid tightly against 1/16" up to 1/2" ID. -
The NBS-2502 brass braiding opens up to a maximum of 3/4" ID. Universal applications and will braid tightly against 3/16" up to 3/4" ID.
-
Out of stock
Kit includes: (4) 2's (4) 4's (6) 6's (4) 8's and (4) 12's (100) M/F Terminals. -
Kit includes: (4) 2's (4) 4's (6) 6's (4) 8's and (4) 12's (100) M/F Terminals. -
Kit includes: (8) 2's (8) 4's (8) 3's (8) 6's and (8) 8's with (100) M/F Terminals. -
Kit includes: (6) 2's (4) 4's (4) 6's (8) 9's and (8) 12's with (100) M/F Terminals. -
(4-each) Delphi® and AMP® EFI and Component Connectors, Terminals and Wire Seals (See Electrical Connectors for descriptions.) -
NAMZ Molex® MX-150 Builders Kit, (Gray and Black) (2) 3's GRandBK (2) 4's GRandBK (4) 6's BLK (4) 8's GRY (3) 12's BLK (3) 16's GRY and (100) M/F Terminals. -
NAMZ 2-AMP® MINI Fuse, 5-Pack -
NAMZ 5-AMP® MINI Fuse, 5-Pack -
NAMZ 15-AMP® MINI Fuse, 5-Pack -
NAMZ 1-AMP® ATO Fuse, 5-Pack. (OEM # 72300-89) -
NAMZ 3-AMP® ATO Fuse, 5-Pack. (OEM # 72301-89) -
NAMZ 5-AMP® ATO Fuse, 5-Pack. (OEM # 72302-89) -
NAMZ 10-AMP® ATO Fuse, 5-Pack. (OEM # 72340-94) -
NAMZ 15-AMP® ATO Fuse, 5-Pack. (OEM # 72347-94) -
NAMZ Replacement 10-AMP® (Manual Reset) Circuit Breaker, Blade Type (OEM # 74586-94) -
ATC 4-Way Fuse Block
Product Categories
Wiring Products
Lighting Modules
L.E.D. Lighting
New Products
Clearance
Important Links
My Account
Distributors
Private Label
Shipping
Warranty and Returns
All content property of NAMZ Custom Cycle Products Inc. © 1999-2024 | Privacy Policy | Site Map | Terms of Service