Shop
-
Our hard-wired Illuminatorâ„¢ provides running light, brake light and turn signal functions into (1) wire for left and (1) wire for right side rear turn signals. This modules also has a built-in Load Equalizer to prevent rapid flashing turn signals. FITS: (Road King, Road Glide, Electra Glide 1991-1993)
-
Our hard-wired Illuminatorâ„¢ provides running light, brake light and turn signal functions into (1) wire for left and (1) wire for right side rear turn signals. This modules also has a built-in Load Equalizer to prevent rapid flashing turn signals. FITS: (Sportster 1986-1996) (Dyna 1985-1996) Softail & FXR 1986-1995) (Road King & Electra Glide 1985-1990)
-
Our Plug-n-Play Illuminatorâ„¢ provides running light, brake light and turn signal functions to the rear turn signals. This modules also has a built-in Load Equalizer to prevent rapid flashing turn signals. FITS: (Sportster 1999-2003), (Dyna 1997-2011), (Softail 1996-2010), (Road King & Electra Glide 1997-2013) (Road Glide 1998-2009 & Road Glide Ultra 2010 to 2013) (Street Glide 2006-2009)
-
Our hard-wired Illuminatorâ„¢ provides running light, brake light and turn signal functions into (1) wire for left and (1) wire for right side rear turn signals. This modules also has a built-in Load Equalizer to prevent rapid flashing turn signals. FITS: (Sportster 1986-2013), (Dyna 1986-2011), (Softail, FXR 1986-2010), (Road King, Electra Glide 1985-2013) (Road Glide 1998-2009) (Street Glide 2006-2009) (V-Rod 2001-2017)
-
Our Plug-n-Play Illuminatorâ„¢ PRO-III provides running light, brake light and turn signal functions to the rear turn signals, Running light and Turn Signal functions to the front turn signals, left and right indicator light output and a 11-second self-canceling feature. If you have a custom bike, no other module is needed to wire your ride! FITS: Universal/custom applications.
-
Plug-n-Play, 11-second self canceling flasher module is a perfect OEM replacement for a fraction of the cost. Plug-n-Play ATS Self-Canceling Turn Signal Moduleâ„¢ fits carbureted (Sportster 2004-2006), (Dyna 2001-2006), (Softail 2001-2006), (Road King, Electra, Ultra, Street & Road Glides 2001-2006) with AFTER-MARKET IGNITION MODULES ONLY. Comes with installed 12-position MALE connector. (HD# 68921-01D)
-
Plug-n-Play, 11-second self canceling flasher module is a perfect OEM replacement for a fraction of the cost. Plug-n-Play ATS Self-Canceling Turn Signal Moduleâ„¢ (Sportster 1996-2003), (Dyna 1996-2000), (Softail 1996-2000), Road King, Electra Glide 1996-2000) with installed 8-position MALE connector. (Replaces HD# 68540-96)
-
This module is intended to enable a pair of single function lights, (power/ground) to perform as a dual function lights, (high/low and ground). Connect to power, ground, running & brake light wires while the output will have a pair of power wires with running & brake light and a pair of ground wires.
-
Our METRIC Plug-n-Play Illuminatorâ„¢ PRO-III provides running light, brake light and turn signal functions to the rear turn signals, Running light and Turn Signal functions to the front turn signals, left and right indicator light output and a 11-second self-canceling feature. If you have a custom bike, no other module is needed to wire your ride! FITS: Universal/custom metric applications.
-
Our Plug-n-Play DYNAMIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Static sequential flashing: When the turn signal button is pressed, the first LED will lite up followed by the second and third before all (3) shut off and the sequence starts again. This module works perfect with our Royal Flush LED kits!
-
Our Plug-n-Play DYNAMIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Static sequential flashing: When the turn signal button is pressed, the first LED will lite up followed by the second and third before all (3) shut off and the sequence starts again. This module works perfect with our Royal Flush LED kits!
-
Our Plug-n-Play DYNAMIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Static sequential flashing: When the turn signal button is pressed, the first LED will lite up followed by the second and third before all (3) shut off and the sequence starts again. This module works perfect with our Royal Flush LED kits!
-
Our Plug-n-Play DYNAMIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Static sequential flashing: When the turn signal button is pressed, the first LED will lite up followed by the second and third before all (3) shut off and the sequence starts again. This module works perfect with our Royal Flush LED kits!
-
Our Plug-n-Play DYNAMIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Dynamic sequential flashing: When the turn signal button is pressed, the first LED will lite up then power off, followed by the second on/off and third on/off before the sequence starts again. This module works perfect with our Royal Flush LED kits!
-
Our hard-wired DYNAMIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Dynamic sequential flashing: When the turn signal button is pressed, the first LED will lite up then power off, followed by the second on/off and third on/off before the sequence starts again. This module works perfect with our Royal Flush LED kits!
-
Our Plug-n-Play STATIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Static sequential flashing: When the turn signal button is pressed, the first LED will lite up followed by the second and third before all (3) shut off and the sequence starts again. This module works perfect with our Royal Flush LED kits!
-
Our Plug-n-Play STATIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Static sequential flashing: When the turn signal button is pressed, the first LED will lite up followed by the second and third before all (3) shut off and the sequence starts again. This module works perfect with our Royal Flush LED kits!
-
Our Plug-n-Play STATIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Static sequential flashing: When the turn signal button is pressed, the first LED will lite up followed by the second and third before all (3) shut off and the sequence starts again. This module works perfect with our Royal Flush LED kits!
-
Our Plug-n-Play STATIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Static sequential flashing: When the turn signal button is pressed, the first LED will lite up followed by the second and third before all (3) shut off and the sequence starts again. This module works perfect with our Royal Flush LED kits!
-
Our Plug-n-Play STATIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Static sequential flashing: When the turn signal button is pressed, the first LED will lite up followed by the second and third before all (3) shut off and the sequence starts again. This module works perfect with our Royal Flush LED kits! https://youtu.be/vSlPRxxSjWQ
-
Our hard-wired STATIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Static sequential flashing: When the turn signal button is pressed, the first LED will lite up followed by the second and third before all (3) shut off and the sequence starts again. This module works perfect with our Royal Flush LED kits!
-
Premium Bullet Style SWITCHBACKSâ„¢ White Running Light with Amber Turn Signal, 1157 (high/low) Socket, Pair (Front ONLY) (White running light shuts off when turn signal is activated, then our signals will flash from bright-amber to dim-amber until the turn signal function resets.)
- Lifetime Warranty!
-
Sale!Deluxe Bullet Style SWITCHBACKSâ„¢ White Running Light with Amber Turn Signal, 1157 (high/low) Socket, Pair (Front ONLY) (White running light shuts off when turn signal is activated, then our signals will flash from bright-amber to dim-amber until the turn signal function resets.)
- Lifetime Warranty!
-
Sale!Deluxe Bullet Style SWITCHBACKSâ„¢ White Running Light with Amber Turn Signal, 1157 (high/low) Socket, Pair (Front ONLY) (White running light shuts off when turn signal is activated, then our signals will flash from bright-amber to off until the turn signal function resets.)
- Lifetime Warranty!
-
Premium Bullet Style SWITCHBACKSâ„¢ Red Running Light with Red Turn Signal LED Insert, 1157 (high/low) Socket, Pair (Rear ONLY) (Red running light shuts off, Red turn to OFF when turn signal switch is activated)
- NOT FOR USE ON MODELS WITHOUT A CENTER TAILLIGHT.
- Lifetime Warranty on Bullet LED Inserts. (exceptions; abuse, tampering, modifications or normal wear & tear on socket)
-
Sale!Deluxe Bullet Style SWITCHBACKSâ„¢ Red Running Light with Red Turn Signal LED Insert, 1157 (high/low) Socket, Pair (Rear ONLY) (Red running light shuts off, Red turn to OFF when turn signal switch is activated)
- NOT FOR USE ON MODELS WITHOUT A CENTER TAILLIGHT.
- Lifetime Warranty!
-
Sale!Deluxe Bullet Style SWITCHBACKSâ„¢ Red Running Light with Amber Turn Signal LED Insert, 1157 (high/low) Socket, Pair (Rear ONLY) (Red running light shuts off, Amber turn to OFF when turn signal switch is activated)
- NOT FOR USE ON MODELS WITHOUT A CENTER TAILLIGHT.
- Lifetime Warranty!
-
Sale!Letric Lighting Co. Deluxe Bullet Style SWITCHBACKSâ„¢ White Running Light with Amber Turn Signal High Amber Low, (White running light shuts off, Amber turn to Amber run when turn signal switch is activated) Fits: 2016-2020 CVO Models Street Glide, Limited, Road Glide, & Breakout, Plug-n-Play!
- Lifetime Warranty!
-
Sale!Letric Lighting Co. Deluxe Bullet Style SWITCHBACKSâ„¢ White Running Light with Amber Turn Signal, (Front ONLY) (White running light shuts off, Amber turn to OFF when turn signal switch is activated) Fits: 2016-2020 CVO Models Street Glide, Limited, Road Glide, & Breakout, Plug-n-Play!
- Lifetime Warranty!
-
Letric Lighting Co. Standard Bullet Style SWITCHBACKSâ„¢ White Running Light with Amber Turn Signal High Amber Low, (White running light shuts off, Amber turn to Amber run when turn signal switch is activated) Fits: 2016-2020 CVO Models Street Glide, Limited, Road Glide, & Breakout, Plug-n-Play!
- Lifetime Warranty!
- Multi-color, omni directional, surface mount LED's with mating and installed JAE male connector and heavy conformal coated circuit board.
- OEM connector (high/low) Socket (pair)
- Front ONLY
- White running light shuts off, Amber turn signal to Amber running light when turn signal switch is activated
-
Letric Lighting Co. Standard Bullet Style SWITCHBACKSâ„¢ White Running Light with Amber Turn Signal, (Front ONLY) (White running light shuts off, Amber turn to OFF when turn signal switch is activated) Fits: 2016-2020 CVO Models Street Glide, Limited, Road Glide, & Breakout, Plug-n-Play!
- Lifetime Warranty!
- Multi-color, omni directional, surface mount LED's with mating and installed JAE male connector and heavy conformal coated circuit board.