-
NAMZ 4″ Plug-n-Play Front Turn Signal Extension. Fits: (2014-2024 Street Glide®®, Road Glide®®, Ultra®® Models, 2017-2024 Road King®® Special, 2016-2024 Softail® (EXCEPT FLSTC and FLSTN) -
Since the oil sending harness is hardwired, we had to be creative when designing our braided harness. We came up with an 18" long braided hose that easily slides over the single, 18-gauge wire. This makes your job of installing it much quicker. Comes ready to install with necessary hardware. -
The NAMZ "DIY" kits are the easiest way to improve the look of components without having to purchase new ones. Our 48" regulator "DIY" kit comes with all of the individual parts you need to braid your existing regulator wiring harness. If you are going to install yourself, be sure to disconnect your battery first! -
Did you ever see that ugly wire coming out of your cam cover? That is part of your ignition system and we can make it look much better. This NAMZ 48" "DIY" kit has everything you need to braid your ignition wiring harness. We recommend that this is installed by an experienced motorcycle technician.
-
Do it yourself braid kits that include two pieces of 40” stainless, black and clear heat shrink and NAMZ logo ends. Simply remove OEM wire covering, install our black shrink, stainless, then clear shrink to protect the stainless and your bikes finish. This kit is intended to be used on externally wired handlebar switch wiring. -
We have been making handlebar switch kits since 1999 and we have not changed a thing since. Our 20 inch DIY kits are just that, do it yourself braid kits that include two pieces of stainless, black and clear heat shrink and NAMZ logo ends. This kit is intended to be used on internally wired handlebar switch wiring. -
NAMZ 15" HD Tri Glide Reverse Harness Extension. -
NAMZ 12" HD Tri Glide Reverse Harness Extension.
-
NAMZ 8" HD Tri Glide Reverse Harness Extension.
-
NAMZ 4" HD Tri Glide Reverse Harness Extension.
-
Our turn signal wiring extensions were originally designed for 2012 through 2017 Dyna® Models when you wanted to relocate the stock bullet-style front turn signals from under the switch housings. On these years, the turn signal wiring was hard-wired onto the circuit board in the switch housing. These wires can simply be cut and safely covered with heat shrink or electrical tape. The mating 3-position connectors on our harness are located in the backbone of the bike with nothing connected. So if you choose to use the OEM signals or any other style of turn signal, solder on our extensions and make the simple plug-n-play connections! You can also use these extensions on 2004 through 2013 Road Glide®® Models if install OEM or aftermarket front turn signals.- Solder-on
- 36" left and right color matching wires
- Heat shrink and preinstalled OEM mating connectors included
-
Our turn signal wiring extensions were originally designed for 2011 through 2017 Softail® Models when you wanted to relocate the stock bullet-style front turn signals from under the switch housings. On these years, the turn signal wiring was hard-wired onto the circuit board in the switch housing. These wires can simply be cut and safely covered with heat shrink or electrical tape. The mating 6-position connector on our harness is located on the backbone of the bike with nothing connected to it. So if you choose to use the OEM signals or any other style of turn signal, solder on our extensions and make the simple plug-n-play connections!- Fitment:
- 1996-2022 Sportster®
- 1996-2005 Dyna®
- 1996-2015 Softail®
- ALL Dresser Models from 1996-2013 except 2004-Up Road Glide®®
- Solder-on
- 36″ left and right color matching wires
- Heat shrink and preinstalled OEM mating connectors included
- Fitment:
-
NAMZ 15" fits 1996-2010 ALL models, 2011-2017 FLSTC, FLSTN and Dyna®, and Sportster® 2011-2022 -
NAMZ 12" fits 1996-2010 ALL models, 2011-2017 FLSTC, FLSTN and Dyna®, and Sportster® 2011-2022
-
NAMZ 8" fits 1996-2010 ALL models, 2011-2017 FLSTC, FLSTN and Dyna®, and Sportster® 2011-2022
-
NAMZ 4" fits 1996-2010 ALL models, 2011-2017 FLSTC, FLSTN and Dyna®, and Sportster® 2011-2022
Product Categories
Wiring Products
Lighting Modules
L.E.D. Lighting
New Products
Clearance
Important Links
My Account
Distributors
Private Label
Shipping
Warranty and Returns
All content property of NAMZ Custom Cycle Products Inc. © 1999-2024 | Privacy Policy | Site Map | Terms of Service