-
Slantback Low-Profile LED Taillight, 100% Plug-n-Play, RED LENS, clear license plate window and fits HD models with squareback taillight from '99-Up. -
Letric Lighting Co. Bullet Style SWITCHBACKS™ Red Running Light with Red Turn Signal LED Insert, 1157 (high/low) Socket, Pair (Rear ONLY) (Red running light shuts off, Red turn to OFF when turn signal switch is activated)- NOT FOR USE ON MODELS WITHOUT A CENTER TAILLIGHT.
- Lifetime Warranty!
-
Our Plug-n-Play DYNAMIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Dynamic sequential flashing: When the turn signal button is pressed, the first LED will lite up then power off, followed by the second on/off and third on/off before the sequence starts again. This module works perfect with our Royal Flush LED kits! -
Our Plug-n-Play STATIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Static sequential flashing: When the turn signal button is pressed, the first LED will lite up followed by the second and third before all (3) shut off and the sequence starts again. This module works perfect with our Royal Flush LED kits! -
Our Plug-n-Play DYNAMIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Dynamic sequential flashing: When the turn signal button is pressed, the first LED will lite up then power off, followed by the second on/off and third on/off before the sequence starts again. This module works perfect with our Royal Flush LED kits! -
Our Plug-n-Play STATIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Static sequential flashing: When the turn signal button is pressed, the first LED will lite up followed by the second and third before all (3) shut off and the sequence starts again. This module works perfect with our Royal Flush LED kits! -
Replacement Interface Seal, Deutsch, 12 Position (HD# 72179-94) (5-pk) -
Replacement Interface Seal, Deutsch, 3 Position (HD# 72173-94) (5-pk) -
NAMZ ML-110 Series Builders Kit, Includes 110 and Locking 110 Series Connectors. (8) 3's, (8) 4's, and (8) 6's in ML-110, (8) 3's, (8) 4's, (8) 6's and (8) 9's in ML-110 Locking, (100) M/F Terminals. -
The IHL-04-A / Brake Eliminator™ is 100% Plug-n-Play and enables customers to have left and right only turn signals, running and brake lights along with license plate illumination and a ground wire. 2012-Up Dyna with OEM RED Rear Run/Brake/Turn Signals send brake light functionality on the same wire that provides turn signal flashing to the rear turn signals. Using our IHL-04-A with our complete rear fender harness, you can now separate the functions and run amber turn signals allowing for traditional style rear lighting. These modules also have a built-in Load Equalizer™ which will allow ANY style of light, LED, halogen or incandescent to operate without any CAN/Bus interference or trouble codes. Perfect for customizing or adding trailers! -
Sale!
Brass Cap LED Grip Light Indicator Lights, dual function, WHITE running light and AMBER turn signal light, Pair -
Letric Lighting Co. Bullet style LED, Red Running Light, Red Brake Light and Amber Turn Signal, Pair. Fits ALL models with bullet style turn signals. (REAR ONLY)- Lifetime Warranty!
-
NAMZ 20-AMP® ATO Fuse, 5-Pack. -
NAMZ 3/8" ID Blue Flex Sleeving, 10' Section -
A must have for any shop or dealership, this ATO size fuse assortment comes in handy when diagnosing any electrical issue. Part numbers are printed on the inside header card for easy re-ordering. -
NAMZ Victory® Handlebar Control Extensions, 24" Universal, 2009-Up Non-Touring Models (With-Out Audio and Cruise Control)
Product Categories
Wiring Products
Lighting Modules
L.E.D. Lighting
New Products
Clearance
All content property of NAMZ Custom Cycle Products Inc. © 1999-2024 | Privacy Policy | Site Map | Terms of Service