Shop
-
Our hard-wired STATIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Static sequential flashing: When the turn signal button is pressed, the first LED will lite up followed by the second and third before all (3) shut off and the sequence starts again. This module works perfect with our Royal Flush LED kits!
-
Our Plug-n-Play STATIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Static sequential flashing: When the turn signal button is pressed, the first LED will lite up followed by the second and third before all (3) shut off and the sequence starts again. This module works perfect with our Royal Flush LED kits! https://youtu.be/vSlPRxxSjWQ
-
Our Plug-n-Play STATIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Static sequential flashing: When the turn signal button is pressed, the first LED will lite up followed by the second and third before all (3) shut off and the sequence starts again. This module works perfect with our Royal Flush LED kits!
-
Our Plug-n-Play STATIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Static sequential flashing: When the turn signal button is pressed, the first LED will lite up followed by the second and third before all (3) shut off and the sequence starts again. This module works perfect with our Royal Flush LED kits!
-
Our Plug-n-Play STATIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Static sequential flashing: When the turn signal button is pressed, the first LED will lite up followed by the second and third before all (3) shut off and the sequence starts again. This module works perfect with our Royal Flush LED kits!
-
Our Plug-n-Play STATIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Static sequential flashing: When the turn signal button is pressed, the first LED will lite up followed by the second and third before all (3) shut off and the sequence starts again. This module works perfect with our Royal Flush LED kits!
-
Our hard-wired Load Equalizer-03 is designed to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat.
- Fits: (Sportster 1991-2013), (Dyna 1990-2011), (Softail 1990-2010), (Road King, Road Glide, Street Glide & Electra Glide 1990-2013) (V-Rod 2001-2017)
- Keep in mind, this is a "hard-wired" model and you could purchase a 100% plug-n-play version that will be a SIMPLE installation!
-
Our Plug-n-Play Load Equalizer-03 is designed to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. Plug-n-Play SUPER Load Equalizer LEQ™ (Sportster 1999-2003), (Dyna 1997-2011), (Softail 1997-2010), (Road King & Electra Glide 1996-2013) (Road Glide 1998-2009) (Street Glide 2006-2009)
-
Our hard-wired CAN/Bus Load Equalizer is needed to prevent rapid-flashing turn signal indicators and BCM trouble codes when non-compliant turn signals are installed on the FRONT of 2011-Up HD CAN/Bus models. Softail 2011 to Current) (Dyna 2012 to Current) (Sportster, Dyna, Softail, Road King, Road Glide, Street Glide & Electra Glide 2014 to Current)
-
Our Plug-n-Play CAN/Bus Load Equalizers are needed to prevent rapid-flashing turn signal indicators and BCM trouble codes on 2011-Up HD CAN/Bus models when non-compliant turn signals are installed on the rear of the bike. Plug-n-Play SUPER Load Equalizer LEQ™ for use with non-CAN/Bus compliant LED's, (REAR SIGNALS ONLY) (Softail 2011-2017 & Dyna 2012-2017 Models: FXDF, FXDB/P, FXDWG, FLD, FXDC/L, FLSTC, FLSTF/B, FLSTN, FXST)
-
Our Plug-n-Play CAN/Bus Load Equalizers are needed to prevent rapid-flashing turn signal indicators and BCM trouble codes on 2011-Up HD CAN/Bus models when non-compliant turn signals are installed on the rear of the bike. Plug-n-Play SUPER Load Equalizer LEQ™ for use with non-CAN/Bus compliant LED's, (REAR SIGNALS ONLY) (Softail 2011-2017 FXS/B and 2012-2017 FLS/S Models ONLY)
-
Our Plug-n-Play CAN/Bus Load Equalizers are needed to prevent rapid-flashing turn signal indicators and BCM trouble codes on 2011-Up HD CAN/Bus models when non-compliant turn signals are installed on the rear of the bike. Plug-n-Play SUPER Load Equalizer LEQ™ for use with non-CAN/Bus compliant LED's, (REAR SIGNALS ONLY) (Sportster 2014 to Current)
-
Our Plug-n-Play CAN/Bus Load Equalizers are needed to prevent rapid-flashing turn signal indicators and BCM trouble codes on 2011-Up HD CAN/Bus models when non-compliant turn signals are installed on the rear of the bike. Plug-n-Play SUPER Load Equalizer LEQ™ for use with non-CAN/Bus compliant LED's, (REAR SIGNALS ONLY) (Road King, Road Glide, Street Glide & Electra Glide 2014 to Current)
-
This Plug-n-Play CAN/Bus Load Equalizer is needed to prevent brake light BCM trouble codes when removing center taillights on 2011-Up HD CAN/Bus models. Hard-Wire SUPER Brake Light Load Equalizer LEQ™ for use with non-CAN/Bus compliant LED's, (BRAKE LIGHT ONLY) (Softail 2011 to Current) (Dyna 2012 to Current) (All HD Models 2014 to Current)
-
Sale!Black Phosphate Coated, front mirror stem mount for MINI LED's. Made from stainless steel, these mounts replace the 5/16" x 24 OEM acorn nut that keeps your mirror tight. Simply remove OEM nut, thread on mount, tighten jam nut & slide in the 45-CAL mini LED and tighten set screw! (sold in pairs)
-
Sale!Polished Stainless Steel, front mirror stem mount for MINI LED's. Made from stainless steel, these mounts replace the 5/16" x 24 OEM acorn nut that keeps your mirror tight. Simply remove OEM nut, thread on mount, tighten jam nut & slide in the 45-CAL mini LED and tighten set screw! (sold in pairs)