-
Our Plug-n-Play Illuminator™ provides running light, brake light and turn signal functions to the rear turn signals. This modules also has a built-in Load Equalizer to prevent rapid flashing turn signals. FITS: (FXDR/S ONLY) -
Our Plug-n-Play Illuminator™ provides running light, brake light and turn signal functions to the rear turn signals. This modules also has a built-in Load Equalizer to prevent rapid flashing turn signals. FITS: (Jackpot, Hammer, Vegas, Highball and Gunner 2009-2015) -
Our Plug-n-Play Illuminator™ provides running light, brake light and turn signal functions to the rear turn signals. This modules also has a built-in Load Equalizer to prevent rapid flashing turn signals. (FITS: Judge, Boardwalk, Cross-Country, Cross-Roads and Magnum 2011-2015) -
Our Plug-n-Play STATIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Static sequential flashing: When the turn signal button is pressed, the first LED will lite up followed by the second and third before all (3) shut off and the sequence starts again. This module works perfect with our Royal Flush LED kits! -
Our Plug-n-Play DYNAMIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Dynamic sequential flashing: When the turn signal button is pressed, the first LED will lite up then power off, followed by the second on/off and third on/off before the sequence starts again. This module works perfect with our Royal Flush LED kits! -
NAMZ American Ironhorse Replacement Power Harness with Plug-n-Play flasher module. (Fits most 2002 through 2005 Models ONLY) -
NAMZ "Plug-n-Play" Rear Fender Power Tap Harness, fits: (Sportster 1999-2003), (Dyna 1997-2011), (Softail 1997-2010), (Road King® and Electra® Glide 1996-2013) (Road Glide® 1998-2009) (Street Glide® 2006-2009) -
Our Plug-n-Play Illuminator™ provides running light, brake light and turn signal functions to the rear turn signals. This modules also has a built-in Load Equalizer to prevent rapid flashing turn signals. FITS: (Non-Touring Models with LEDs 2009 to Current) -
Our Plug-n-Play CAN/Bus Load Equalizers are needed to prevent rapid-flashing turn signal indicators and BCM trouble codes on 2011-Up HD CAN/Bus models when non-compliant turn signals are installed on the rear of the bike. Plug-n-Play SUPER Load Equalizer LEQ™ for use with non-CAN/Bus compliant LED's, (REAR SIGNALS ONLY) (Sportster 2014 to Current) -
Our Plug-n-Play Load Equalizer-03 is designed to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. Plug-n-Play SUPER Load Equalizer LEQ™ (Road Glide®, Street Glide® 2010-2013) -
Our Plug-n-Play STATIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Static sequential flashing: When the turn signal button is pressed, the first LED will lite up followed by the second and third before all (3) shut off and the sequence starts again. This module works perfect with our Royal Flush LED kits! -
Our Plug-n-Play DYNAMIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Dynamic sequential flashing: When the turn signal button is pressed, the first LED will lite up then power off, followed by the second on/off and third on/off before the sequence starts again. This module works perfect with our Royal Flush LED kits! -
Our Plug-n-Play Illuminator™ provides running light, brake light and turn signal functions to the rear turn signals. This modules also has a built-in Load Equalizer to prevent rapid flashing turn signals. FITS: (Road King®, Electra® Glide 1994-1996) -
Our hard-wired Illuminator™ provides running light, brake light and turn signal functions into (1) wire for left and (1) wire for right side rear turn signals. This modules also has a built-in Load Equalizer to prevent rapid flashing turn signals. FITS: (Road King®, Road Glide®, Electra® Glide 1991-1993) -
Our Plug-n-Play Illuminator™ provides running light, brake light and turn signal functions to NEW rear turn signals. This modules also has a built-in Load Equalizer to prevent rapid flashing turn signals. Comes with NEW rear fender wiring harness. FITS: (Scout 2014 to Current) when replacing rear taillight and turn signals) -
This Plug-n-Play CAN/Bus Load Equalizer is needed to prevent brake light BCM trouble codes when removing center taillights on 2011-Up HD CAN/Bus models. Hard-Wire SUPER Brake Light Load Equalizer LEQ™ for use with non-CAN/Bus compliant LED's, (BRAKE LIGHT ONLY) (Softail 2011 to Current) (Dyna 2012 to Current) (All HD Models 2014 to Current)
Product Categories
Wiring Products
Lighting Modules
L.E.D. Lighting
New Products
Clearance
All content property of NAMZ Custom Cycle Products Inc. © 1999-2024 | Privacy Policy | Site Map | Terms of Service