-
Squareback Red LED Taillight, easy to install, Fits ALL models with OEM squareback taillight from '84-'98. Has optional/integrated turn signals, NO license plate window. -
Slantback Low-Profile LED Taillight, 100% Plug-n-Play, RED LENS, clear license plate window and fits HD models with squareback taillight from '99-Up. -
Slantback Low-Profile LED Taillight, 100% Plug-n-Play, SMOKE LENS, clear license plate window and fits HD models with squareback taillight from '99-Up. -
Letric Lighting Co. Bullet Style SWITCHBACKS™ Red Running Light with Amber Turn Signal LED Insert- NOT FOR USE ON MODELS WITHOUT A CENTER TAILLIGHT.
- Lifetime Warranty!
-
Letric Lighting Co. Bullet Style SWITCHBACKS™ Red Running Light with Red Turn Signal LED Insert, 1157 (high/low) Socket, Pair (Rear ONLY) (Red running light shuts off, Red turn to OFF when turn signal switch is activated)- NOT FOR USE ON MODELS WITHOUT A CENTER TAILLIGHT.
- Lifetime Warranty!
-
Letric Lighting Co. Bullet Style SWITCHBACKS™ White Running Light with Amber Turn Signal, 1157 (high/low) Socket, Pair (Front ONLY) (White running light shuts off when turn signal is activated, then our signals will flash from bright-amber to dim-amber until the turn signal function resets.)- Lifetime Warranty!
-
Letric Lighting Co. Bullet Style SWITCHBACKS™ White Running Light with Amber Turn Signal, 1157 (high/low) Socket, Pair (Front ONLY) (White running light shuts off when turn signal is activated, then our signals will flash from bright-amber to off until the turn signal function resets.)- Lifetime Warranty!
-
OEM 2014-2022 Harley® Davidson Radio Connector/BCM Connector Kit with mating terminals in (3) gauge sizes. (HD# 69200193) -
OEM Tour-Pack Light Bar Connector Kit, includes terminals, wire seals, and TPA lock. Fits: 2014-Up, 5-position connector. (HD# 69200225) -
OEM Throttle Control Connector Kit, includes TPA lock, wire seals and terminals. Fits: 2017-Up M8 Models, 6 Position-single row. (HD# 69201394) -
Our Plug-n-Play DYNAMIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Dynamic sequential flashing: When the turn signal button is pressed, the first LED will lite up then power off, followed by the second on/off and third on/off before the sequence starts again. This module works perfect with our Royal Flush LED kits! -
Our Plug-n-Play STATIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Static sequential flashing: When the turn signal button is pressed, the first LED will lite up followed by the second and third before all (3) shut off and the sequence starts again. This module works perfect with our Royal Flush LED kits! -
Our Plug-n-Play DYNAMIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Dynamic sequential flashing: When the turn signal button is pressed, the first LED will lite up then power off, followed by the second on/off and third on/off before the sequence starts again. This module works perfect with our Royal Flush LED kits! -
Our Plug-n-Play STATIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Static sequential flashing: When the turn signal button is pressed, the first LED will lite up followed by the second and third before all (3) shut off and the sequence starts again. This module works perfect with our Royal Flush LED kits! -
Our Plug-n-Play DYNAMIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Dynamic sequential flashing: When the turn signal button is pressed, the first LED will lite up then power off, followed by the second on/off and third on/off before the sequence starts again. This module works perfect with our Royal Flush LED kits! -
Our Plug-n-Play STATIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Static sequential flashing: When the turn signal button is pressed, the first LED will lite up followed by the second and third before all (3) shut off and the sequence starts again. This module works perfect with our Royal Flush LED kits!
Product Categories
Wiring Products
Lighting Modules
L.E.D. Lighting
New Products
Clearance
Important Links
My Account
Distributors
Private Label
Shipping
Warranty and Returns
All content property of NAMZ Custom Cycle Products Inc. © 1999-2024 | Privacy Policy | Site Map | Terms of Service