-
NAMZ Victory® Handlebar Control Extensions, 24" Universal, 2009-Up Non-Touring Models (With-Out Audio and Cruise Control) -
NAMZ Victory® Handlebar Control Extensions, 24" Universal, 2009-Up Touring Models (With Audio and Cruise Control) -
NAMZ OEM replacement electrical power connection for navigation, audio, tachometers, oil pressure gauges and heated grips. (Fits '14 XL, '12-later Dyna and '11-later Softail models) -
Plug-n-Play Power Port Plug Y-Adaptor allows for (2) connections at the same time. Provides 12-volt power and a ground for multiple uses. Fits ALL 1994 - 2011 Touring and Trike Models. -
NHD-68355-05 2004-earlier models with auxiliary lights equipped with spade connectors require this specific wiring harness when using 4" Auxiliary lights. 68355-05 -
Our turn signal wiring extensions were originally designed for 2011 through 2017 Softail® Models when you wanted to relocate the stock bullet-style front turn signals from under the switch housings. On these years, the turn signal wiring was hard-wired onto the circuit board in the switch housing. These wires can simply be cut and safely covered with heat shrink or electrical tape. The mating 6-position connector on our harness is located on the backbone of the bike with nothing connected to it. So if you choose to use the OEM signals or any other style of turn signal, solder on our extensions and make the simple plug-n-play connections!- Fitment:
- 1996-2022 Sportster®
- 1996-2005 Dyna®
- 1996-2015 Softail®
- ALL Dresser Models from 1996-2013 except 2004-Up Road Glide®®
- Solder-on
- 36″ left and right color matching wires
- Heat shrink and preinstalled OEM mating connectors included
- Fitment:
-
OEM style LED Headlight Adaptor Harness, (Daymaker) Fits 2004-Later FLTR, (HD# 69200533) -
Our turn signal wiring extensions were originally designed for 2012 through 2017 Dyna® Models when you wanted to relocate the stock bullet-style front turn signals from under the switch housings. On these years, the turn signal wiring was hard-wired onto the circuit board in the switch housing. These wires can simply be cut and safely covered with heat shrink or electrical tape. The mating 3-position connectors on our harness are located in the backbone of the bike with nothing connected. So if you choose to use the OEM signals or any other style of turn signal, solder on our extensions and make the simple plug-n-play connections! You can also use these extensions on 2004 through 2013 Road Glide®® Models if install OEM or aftermarket front turn signals.- Solder-on
- 36" left and right color matching wires
- Heat shrink and preinstalled OEM mating connectors included
-
Our Plug-n-Play Illuminator™ provides running light, brake light and turn signal functions to the rear turn signals. This modules also has a built-in Load Equalizer to prevent rapid flashing turn signals. FITS: (2014 to Current Road King® and Police Bike) -
OEM style LED Headlight Harness, Fits 2014-Later FL and Trike Models except FLTR, (HD# 69200897) -
Indian® Heated Grip Extension Harness, 24" long, fits ALL 2014-Up Indian®® Models with heated grips (except Scout®) -
Our Plug-n-Play CAN/Bus Load Equalizers are needed to prevent rapid-flashing turn signal indicators and BCM trouble codes on 2011-Up HD CAN/Bus models when non-compliant turn signals are installed on the rear of the bike. Plug-n-Play SUPER Load Equalizer LEQ™ for use with non-CAN/Bus compliant LED's, (REAR SIGNALS ONLY) (Road King®, Road Glide®, Street Glide® and Electra® Glide 2014 to Current) -
Our Plug-n-Play Illuminator™ provides running light, brake light and turn signal functions to the rear turn signals. This modules also has a built-in Load Equalizer to prevent rapid flashing turn signals. FITS: (All Big Twin Models 2014 to Current) -
Our Plug-n-Play Illuminator™ provides running light functions to the front turn signals for added visibility. This modules also has a built-in Load Equalizer to prevent rapid flashing turn signals. FITS:Plug-n-Play Illuminator™ adds running light function to existing front turn signals for brighter visibility. (RUN-TURN with LEQ™) (All Indian® Big Twin Models 2018 -Up EXCEPT all Scout Models) -
NAMZ Headlight Adapter Pigtail, with (female) H9 and H11 to (male) H4 Connector. Fits: ALL models with 7" Headlights when using 2014-Up Road King® Dual LED Headlight. -
Our Plug-n-Play STATIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Static sequential flashing: When the turn signal button is pressed, the first LED will lite up followed by the second and third before all (3) shut off and the sequence starts again. This module works perfect with our Royal Flush LED kits!
Product Categories
Wiring Products
Lighting Modules
L.E.D. Lighting
New Products
Clearance
Important Links
My Account
Distributors
Private Label
Shipping
Warranty and Returns
All content property of NAMZ Custom Cycle Products Inc. © 1999-2024 | Privacy Policy | Site Map | Terms of Service