-
Use this rear fender harness with our ILL-01-A when your stock rear fender harness is not available or to allow for easier modification or customization when adding custom lighting. -
Our Plug-n-Play Illuminator™ provides running light, brake light and turn signal functions to the rear turn signals. This modules also has a built-in Load Equalizer to prevent rapid flashing turn signals. FITS: (Sportster 1999-2003), (Dyna 1997-2011), (Softail 1996-2010), (Road King® and Electra® Glide 1997-2013) (Road Glide® 1998-2009 and Road Glide® Ultra® 2010 to 2013) (Street Glide® 2006-2009) -
Our hard-wired Illuminator™ provides running light, brake light and turn signal functions into (1) wire for left and (1) wire for right side rear turn signals. This modules also has a built-in Load Equalizer to prevent rapid flashing turn signals. FITS: (Sportster 1986-2013), (Dyna 1986-2011), (Softail, FXR 1986-2010), (Road King®, Electra® Glide 1985-2013) (Road Glide® 1998-2009) (Street Glide® 2006-2009) (V-Rod 2001-2017) -
Our Plug-n-Play Illuminator™ PRO-III provides running light, brake light and turn signal functions to the rear turn signals, Running light and Turn Signal functions to the front turn signals, left and right indicator light output and a 11-second self-canceling feature. If you have a custom bike, no other module is needed to wire your ride! FITS: Universal/custom applications. -
Self-Canceling Turn Signal Adapter Module fits ALL (Sportster 2004-2013), (Dyna 2001-2011), (Softail 2001-2010), (Road King, Electra, Ultra, Street & Road Glides 2001-2013) when using along with OEM TSM or TSSM. This module replaces the OEM turn signal flashing functions but leaves the bank angle sensor and serial data connection in tact. No need for a new ECM! **NOTE: If the OEM TSM/TSSM prevents the bike from starting, this module will NOT work to fix this issue, a new ECM is needed. -
Plug-n-Play, 20-second self canceling flasher module is a perfect OEM replacement for a fraction of the cost. Plug-n-Play ATS Self-Canceling Turn Signal Module™ fits ALL (Sportster 2004-2013), (Dyna 2001-2011), (Softail 2001-2010), (Road King®, Electra®, Ultra®, Street and Road Glide®s 2001-2013) with AFTER-MARKET IGNITION MODULES or ECM ONLY. Comes with installed 12-position MALE connector. (HD# 68921-01D) -
Plug-n-Play, 11-second self canceling flasher module is a perfect OEM replacement for a fraction of the cost. Plug-n-Play ATS Self-Canceling Turn Signal Module™ fits (Sportster 1994-1996), Road King®, Electra® Glide 1994-1995) with installed 8-position FEMALE connector. (HD# 68570-94B) -
Plug-n-Play, 11-second self canceling flasher module is a perfect OEM replacement for a fraction of the cost. Plug-n-Play ATS Self-Canceling Turn Signal Module™ (Sportster 1997-2003), (Dyna 1996-2000), (Softail 1996-2000), Road King®, Electra® Glide 1996-2000) with installed 8-position MALE connector. (Replaces HD# 68540-96) -
Plug-n-Play, 11-second self canceling flasher module is a perfect OEM replacement for a fraction of the cost. Plug-n-Play ATS Self-Canceling Turn Signal Module™ (Sportster 1992-1993) (FX 1990-1995) (FL 1987-1993) with installed connector. (Replaces HD# 68537-89G) -
Our 11-second, hard-wired self canceling flasher module is the way to go for bikes with mechanical flashers. FITS: (Sportster 1973-1991) (FX 1973-1989) (FL 1973-1986) or any custom motorcycle. -
Badlands Pulsing Brake Module, universal fitment, pulses 5-times before remaining solid brake light. Simple hard-wire design and will work before most Badlands modules! -
If room is an issue, (custom bike applications) our economical IHL-03 Intensifier™ will perform the same functions of our IHL-02 but are only rated for 500-milliAMP®s (LED‚Äôs) maximum. -
This module is intended to enable a pair of single function lights, (power/ground) to perform as a dual function lights, (high/low and ground). Connect to power, ground, running and brake light wires while the output will have a pair of power wires with running and brake light and a pair of ground wires. -
This module is intended to enable a single function light, (power/ground) to perform as a dual function light, (high/low and ground). Connect to power, ground, running and brake light wires while the output will have (1) power wire with running and brake light and a ground wire. -
Our METRIC Plug-n-Play Illuminator™ PRO-III provides running light, brake light and turn signal functions to the rear turn signals, Running light and Turn Signal functions to the front turn signals, left and right indicator light output and a 11-second self-canceling feature. If you have a custom bike, no other module is needed to wire your ride! FITS: Universal/custom metric applications. -
Metric Hard Wire Illuminator™ (RUN-TURN with LEQ™) (Aprilla, Buell, Ducati, Honda, Kawasaki, Suzuki, Triumph and Yamaha) (NO BMW with integrated brake)
Product Categories
Wiring Products
Lighting Modules
L.E.D. Lighting
New Products
Clearance
Important Links
My Account
Distributors
Private Label
Shipping
Warranty and Returns
All content property of NAMZ Custom Cycle Products Inc. © 1999-2024 | Privacy Policy | Site Map | Terms of Service