Shop
-
This module is intended to enable a pair of single function lights, (power/ground) to perform as a dual function lights, (high/low and ground). Connect to power, ground, running & brake light wires while the output will have a pair of power wires with running & brake light and a pair of ground wires. -
This module is intended to enable a single function light, (power/ground) to perform as a dual function light, (high/low and ground). Connect to power, ground, running & brake light wires while the output will have (1) power wire with running & brake light and a ground wire. -
Our METRIC Plug-n-Play Illuminator™ PRO-III provides running light, brake light and turn signal functions to the rear turn signals, Running light and Turn Signal functions to the front turn signals, left and right indicator light output and a 11-second self-canceling feature. If you have a custom bike, no other module is needed to wire your ride! FITS: Universal/custom metric applications. -
Metric Hard Wire Illuminator™ (RUN-TURN with LEQ™) (Aprilla, Buell, Ducati, Honda, Kawasaki, Suzuki, Triumph & Yamaha) (NO BMW with integrated brake) -
Our Plug-n-Play Load Equalizer-03 is designed to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. Hard-Wire SUPER Metric Load Equalizer LEQ™ (Fits most metric motorcycles except Honda) -
Our Plug-n-Play DYNAMIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Static sequential flashing: When the turn signal button is pressed, the first LED will lite up followed by the second and third before all (3) shut off and the sequence starts again. This module works perfect with our Royal Flush LED kits! -
Our Plug-n-Play DYNAMIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Static sequential flashing: When the turn signal button is pressed, the first LED will lite up followed by the second and third before all (3) shut off and the sequence starts again. This module works perfect with our Royal Flush LED kits! -
Our Plug-n-Play DYNAMIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Static sequential flashing: When the turn signal button is pressed, the first LED will lite up followed by the second and third before all (3) shut off and the sequence starts again. This module works perfect with our Royal Flush LED kits! -
Our Plug-n-Play DYNAMIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Static sequential flashing: When the turn signal button is pressed, the first LED will lite up followed by the second and third before all (3) shut off and the sequence starts again. This module works perfect with our Royal Flush LED kits! -
Our Plug-n-Play DYNAMIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Dynamic sequential flashing: When the turn signal button is pressed, the first LED will lite up then power off, followed by the second on/off and third on/off before the sequence starts again. This module works perfect with our Royal Flush LED kits! -
Our hard-wired DYNAMIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Dynamic sequential flashing: When the turn signal button is pressed, the first LED will lite up then power off, followed by the second on/off and third on/off before the sequence starts again. This module works perfect with our Royal Flush LED kits! -
Our Plug-n-Play STATIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Static sequential flashing: When the turn signal button is pressed, the first LED will lite up followed by the second and third before all (3) shut off and the sequence starts again. This module works perfect with our Royal Flush LED kits!
-
Our Plug-n-Play STATIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Static sequential flashing: When the turn signal button is pressed, the first LED will lite up followed by the second and third before all (3) shut off and the sequence starts again. This module works perfect with our Royal Flush LED kits!
-
Our Plug-n-Play STATIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Static sequential flashing: When the turn signal button is pressed, the first LED will lite up followed by the second and third before all (3) shut off and the sequence starts again. This module works perfect with our Royal Flush LED kits!
-
Our Plug-n-Play STATIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Static sequential flashing: When the turn signal button is pressed, the first LED will lite up followed by the second and third before all (3) shut off and the sequence starts again. This module works perfect with our Royal Flush LED kits!
-
Our Plug-n-Play STATIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Static sequential flashing: When the turn signal button is pressed, the first LED will lite up followed by the second and third before all (3) shut off and the sequence starts again. This module works perfect with our Royal Flush LED kits! https://youtu.be/vSlPRxxSjWQ
