-
Our Plug-n-Play STATIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Static sequential flashing: When the turn signal button is pressed, the first LED will lite up followed by the second and third before all (3) shut off and the sequence starts again. This module works perfect with our Royal Flush LED kits! https://youtu.be/vSlPRxxSjWQ -
Our Plug-n-Play STATIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Static sequential flashing: When the turn signal button is pressed, the first LED will lite up followed by the second and third before all (3) shut off and the sequence starts again. This module works perfect with our Royal Flush LED kits! -
Our Plug-n-Play STATIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Static sequential flashing: When the turn signal button is pressed, the first LED will lite up followed by the second and third before all (3) shut off and the sequence starts again. This module works perfect with our Royal Flush LED kits! -
Our Plug-n-Play STATIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Static sequential flashing: When the turn signal button is pressed, the first LED will lite up followed by the second and third before all (3) shut off and the sequence starts again. This module works perfect with our Royal Flush LED kits! -
Our Plug-n-Play STATIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Static sequential flashing: When the turn signal button is pressed, the first LED will lite up followed by the second and third before all (3) shut off and the sequence starts again. This module works perfect with our Royal Flush LED kits! -
Our hard-wired DYNAMIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Dynamic sequential flashing: When the turn signal button is pressed, the first LED will lite up then power off, followed by the second on/off and third on/off before the sequence starts again. This module works perfect with our Royal Flush LED kits! -
Our Plug-n-Play DYNAMIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Dynamic sequential flashing: When the turn signal button is pressed, the first LED will lite up then power off, followed by the second on/off and third on/off before the sequence starts again. This module works perfect with our Royal Flush LED kits! -
Our Plug-n-Play DYNAMIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Dynamic sequential flashing: When the turn signal button is pressed, the first LED will lite up then power off, followed by the second on/off and third on/off before the sequence starts again. This module works perfect with our Royal Flush LED kits! -
Our Plug-n-Play DYNAMIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Dynamic sequential flashing: When the turn signal button is pressed, the first LED will lite up then power off, followed by the second on/off and third on/off before the sequence starts again. This module works perfect with our Royal Flush LED kits! -
Our Plug-n-Play DYNAMIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Dynamic sequential flashing: When the turn signal button is pressed, the first LED will lite up then power off, followed by the second on/off and third on/off before the sequence starts again. This module works perfect with our Royal Flush LED kits! -
Our Plug-n-Play DYNAMIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Dynamic sequential flashing: When the turn signal button is pressed, the first LED will lite up then power off, followed by the second on/off and third on/off before the sequence starts again. This module works perfect with our Royal Flush LED kits! -
Our Plug-n-Play Load Equalizer-03 is designed to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. Hard-Wire SUPER Metric Load Equalizer LEQ™ (Fits most metric motorcycles except Honda) -
Metric Hard Wire Illuminator™ (RUN-TURN with LEQ™) (Aprilla, Buell, Ducati, Honda, Kawasaki, Suzuki, Triumph and Yamaha) (NO BMW with integrated brake) -
Our METRIC Plug-n-Play Illuminator™ PRO-III provides running light, brake light and turn signal functions to the rear turn signals, Running light and Turn Signal functions to the front turn signals, left and right indicator light output and a 11-second self-canceling feature. If you have a custom bike, no other module is needed to wire your ride! FITS: Universal/custom metric applications. -
This module is intended to enable a single function light, (power/ground) to perform as a dual function light, (high/low and ground). Connect to power, ground, running and brake light wires while the output will have (1) power wire with running and brake light and a ground wire. -
This module is intended to enable a pair of single function lights, (power/ground) to perform as a dual function lights, (high/low and ground). Connect to power, ground, running and brake light wires while the output will have a pair of power wires with running and brake light and a pair of ground wires. -
If room is an issue, (custom bike applications) our economical IHL-03 Intensifier™ will perform the same functions of our IHL-02 but are only rated for 500-milliAMP®s (LED‚Äôs) maximum. -
Badlands Pulsing Brake Module, universal fitment, pulses 5-times before remaining solid brake light. Simple hard-wire design and will work before most Badlands modules! -
Our 11-second, hard-wired self canceling flasher module is the way to go for bikes with mechanical flashers. FITS: (Sportster 1973-1991) (FX 1973-1989) (FL 1973-1986) or any custom motorcycle. -
Plug-n-Play, 11-second self canceling flasher module is a perfect OEM replacement for a fraction of the cost. Plug-n-Play ATS Self-Canceling Turn Signal Module™ (Sportster 1992-1993) (FX 1990-1995) (FL 1987-1993) with installed connector. (Replaces HD# 68537-89G) -
Plug-n-Play, 11-second self canceling flasher module is a perfect OEM replacement for a fraction of the cost. Plug-n-Play ATS Self-Canceling Turn Signal Module™ (Sportster 1997-2003), (Dyna 1996-2000), (Softail 1996-2000), Road King®, Electra® Glide 1996-2000) with installed 8-position MALE connector. (Replaces HD# 68540-96) -
Plug-n-Play, 11-second self canceling flasher module is a perfect OEM replacement for a fraction of the cost. Plug-n-Play ATS Self-Canceling Turn Signal Module™ fits (Sportster 1994-1996), Road King®, Electra® Glide 1994-1995) with installed 8-position FEMALE connector. (HD# 68570-94B) -
Plug-n-Play, 20-second self canceling flasher module is a perfect OEM replacement for a fraction of the cost. Plug-n-Play ATS Self-Canceling Turn Signal Module™ fits ALL (Sportster 2004-2013), (Dyna 2001-2011), (Softail 2001-2010), (Road King®, Electra®, Ultra®, Street and Road Glide®s 2001-2013) with AFTER-MARKET IGNITION MODULES or ECM ONLY. Comes with installed 12-position MALE connector. (HD# 68921-01D) -
Self-Canceling Turn Signal Adapter Module fits ALL (Sportster 2004-2013), (Dyna 2001-2011), (Softail 2001-2010), (Road King, Electra, Ultra, Street & Road Glides 2001-2013) when using along with OEM TSM or TSSM. This module replaces the OEM turn signal flashing functions but leaves the bank angle sensor and serial data connection in tact. No need for a new ECM! **NOTE: If the OEM TSM/TSSM prevents the bike from starting, this module will NOT work to fix this issue, a new ECM is needed. -
Our Plug-n-Play Illuminator™ PRO-III provides running light, brake light and turn signal functions to the rear turn signals, Running light and Turn Signal functions to the front turn signals, left and right indicator light output and a 11-second self-canceling feature. If you have a custom bike, no other module is needed to wire your ride! FITS: Universal/custom applications. -
Our hard-wired Illuminator™ provides running light, brake light and turn signal functions into (1) wire for left and (1) wire for right side rear turn signals. This modules also has a built-in Load Equalizer to prevent rapid flashing turn signals. FITS: (Sportster 1986-2013), (Dyna 1986-2011), (Softail, FXR 1986-2010), (Road King®, Electra® Glide 1985-2013) (Road Glide® 1998-2009) (Street Glide® 2006-2009) (V-Rod 2001-2017) -
Our Plug-n-Play Illuminator™ provides running light, brake light and turn signal functions to the rear turn signals. This modules also has a built-in Load Equalizer to prevent rapid flashing turn signals. FITS: (Sportster 1999-2003), (Dyna 1997-2011), (Softail 1996-2010), (Road King® and Electra® Glide 1997-2013) (Road Glide® 1998-2009 and Road Glide® Ultra® 2010 to 2013) (Street Glide® 2006-2009) -
Use this rear fender harness with our ILL-01-A when your stock rear fender harness is not available or to allow for easier modification or customization when adding custom lighting. -
Our hard-wired Illuminator™ provides running light, brake light and turn signal functions into (1) wire for left and (1) wire for right side rear turn signals. This modules also has a built-in Load Equalizer to prevent rapid flashing turn signals. FITS: (Sportster 1986-1996) (Dyna 1985-1996) Softail and FXR 1986-1995) (Road King® and Electra® Glide 1985-1990) -
Our Plug-n-Play Illuminator™ provides running light, brake light and turn signal functions to the rear turn signals. This modules also has a built-in Load Equalizer to prevent rapid flashing turn signals. FITS: (Sportster 2004-2013) -
Our Plug-n-Play Illuminator™ provides running light, brake light and turn signal functions to the rear turn signals. This modules also has a built-in Load Equalizer to prevent rapid flashing turn signals. FITS: (Road King®, Electra® Glide 1994-1996) -
Our hard-wired Illuminator™ provides running light, brake light and turn signal functions into (1) wire for left and (1) wire for right side rear turn signals. This modules also has a built-in Load Equalizer to prevent rapid flashing turn signals. FITS: (Road King®, Road Glide®, Electra® Glide 1991-1993)
Product Categories
Wiring Products
Lighting Modules
L.E.D. Lighting
New Products
Clearance
Important Links
My Account
Distributors
Private Label
Shipping
Warranty and Returns
All content property of NAMZ Custom Cycle Products Inc. © 1999-2024 | Privacy Policy | Site Map | Terms of Service