Shop
-
Our Plug-n-Play DYNAMIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Static sequential flashing: When the turn signal button is pressed, the first LED will lite up followed by the second and third before all (3) shut off and the sequence starts again. This module works perfect with our Royal Flush LED kits!
-
Our Plug-n-Play DYNAMIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Static sequential flashing: When the turn signal button is pressed, the first LED will lite up followed by the second and third before all (3) shut off and the sequence starts again. This module works perfect with our Royal Flush LED kits!
-
Our Plug-n-Play DYNAMIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Static sequential flashing: When the turn signal button is pressed, the first LED will lite up followed by the second and third before all (3) shut off and the sequence starts again. This module works perfect with our Royal Flush LED kits!
-
Our Plug-n-Play DYNAMIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Static sequential flashing: When the turn signal button is pressed, the first LED will lite up followed by the second and third before all (3) shut off and the sequence starts again. This module works perfect with our Royal Flush LED kits!
-
Our Plug-n-Play DYNAMIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Dynamic sequential flashing: When the turn signal button is pressed, the first LED will lite up then power off, followed by the second on/off and third on/off before the sequence starts again. This module works perfect with our Royal Flush LED kits!
-
Our hard-wired DYNAMIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Dynamic sequential flashing: When the turn signal button is pressed, the first LED will lite up then power off, followed by the second on/off and third on/off before the sequence starts again. This module works perfect with our Royal Flush LED kits!
-
Our METRIC Plug-n-Play Illuminator™ PRO-III provides running light, brake light and turn signal functions to the rear turn signals, Running light and Turn Signal functions to the front turn signals, left and right indicator light output and a 11-second self-canceling feature. If you have a custom bike, no other module is needed to wire your ride! FITS: Universal/custom metric applications.
-
Our Plug-n-Play Illuminator™ PRO-III provides running light, brake light and turn signal functions to the rear turn signals, Running light and Turn Signal functions to the front turn signals, left and right indicator light output and a 11-second self-canceling feature. If you have a custom bike, no other module is needed to wire your ride! FITS: Universal/custom applications.
-
Our Plug-n-Play Illuminator™ provides running light, brake light and turn signal functions to NEW rear turn signals. This modules also has a built-in Load Equalizer to prevent rapid flashing turn signals. Comes with NEW rear fender wiring harness. FITS: (Scout 2014 to Current) when replacing rear taillight and turn signals)
-
Our Plug-n-Play Illuminator™ provides running light functions to the front turn signals for added visibility. This modules also has a built-in Load Equalizer to prevent rapid flashing turn signals. FITS:Plug-n-Play Illuminator™ adds running light function to existing front turn signals for brighter visibility. (RUN-TURN with LEQ™) (All Indian Big Twin Models 2018 -Up EXCEPT all Scout Models)
-
Our Plug-n-Play Illuminator™ provides running light, brake light and turn signal functions to the rear turn signals. This modules also has a built-in Load Equalizer to prevent rapid flashing turn signals. CAN/Bus Plug-n-Play Illuminator™ (RUN-BRAKE-TURN with LEQ™) (Softail 2011-2017) (Dyna 2012-2017) FXDF, FXDB/P, FXDWG, FLD, FXDC/L, FLSTC, FLSTF/B, FLSTN, FXST)
-
Our hard-wired Illuminator™ provides running light, brake light and turn signal functions to the rear turn signals. This modules also has a built-in Load Equalizer to prevent rapid flashing turn signals. FITS: Models WITH center taillight. (Sportster 2014 to Current) (Dyna 2012 to Current) (Softail 2011 to Current) (Road King, Road Glide, Street Glide & Electra Glide 2014 to Current)
-
Our Plug-n-Play Illuminator™ provides running light, brake light and turn signal functions to the rear turn signals. This modules also has a built-in Load Equalizer to prevent rapid flashing turn signals. Comes with lenses! FITS: (Sportster 1999-2003, (Dyna, Softail 1999-2013, Road King 2004-2013, Road Glide 2002-2009, Street Glide 2006-2009, Electra Glide 2002-2013 with Deuce-style lenses)
-
Replacement Rear Fender Lighting Harness for use with Badlands ILL-01-SR module. This harness is 48" long, color matching and connects directly to the module with pre-installed connector. The purpose of this harness is to allow the removal of the OEM Tri-Bar light/fascia and OEM rear fender harness attached to it. This harness will replace the OEM and allow you to reuse your stock or any other turn signal/taillight option.
-
Our hard-wired Illuminator™ provides running light, brake light and turn signal functions into (1) wire for left and (1) wire for right side rear turn signals. This modules also has a built-in Load Equalizer to prevent rapid flashing turn signals. FITS: (Road King, Road Glide, Electra Glide 1991-1993)
-
Our hard-wired Illuminator™ provides running light, brake light and turn signal functions into (1) wire for left and (1) wire for right side rear turn signals. This modules also has a built-in Load Equalizer to prevent rapid flashing turn signals. FITS: (Sportster 1986-1996) (Dyna 1985-1996) Softail & FXR 1986-1995) (Road King & Electra Glide 1985-1990)
-
Our Plug-n-Play Illuminator™ provides running light, brake light and turn signal functions to the rear turn signals. This modules also has a built-in Load Equalizer to prevent rapid flashing turn signals. FITS: (Sportster 1999-2003), (Dyna 1997-2011), (Softail 1996-2010), (Road King & Electra Glide 1997-2013) (Road Glide 1998-2009 & Road Glide Ultra 2010 to 2013) (Street Glide 2006-2009)
-
Our hard-wired Illuminator™ provides running light, brake light and turn signal functions into (1) wire for left and (1) wire for right side rear turn signals. This modules also has a built-in Load Equalizer to prevent rapid flashing turn signals. FITS: (Sportster 1986-2013), (Dyna 1986-2011), (Softail, FXR 1986-2010), (Road King, Electra Glide 1985-2013) (Road Glide 1998-2009) (Street Glide 2006-2009) (V-Rod 2001-2017)
-
Plug-n-Play Tail Light Eliminator™ (fits Indian Scout and allows the use of any aftermarket taillight to work as Run/Brake without codes. Designed to work OEM turn signals with labeled factory connectors for easy installation. This modules allows you to replace the OEM taillight and install any version you choose while keeping all of the OEM connections.
-
The IHL-04-A / Brake Eliminator™ is 100% Plug-n-Play and enables customers to have left and right only turn signals, running and brake lights along with license plate illumination and a ground wire. 2014- Up XL with OEM RED Rear Run/Brake/Turn Signals send brake light functionality on the same wire that provides turn signal flashing to the rear turn signals. Using our IHL-04-C with our complete rear fender harness, you can now separate the functions and run amber turn signals allowing for traditional style rear lighting. These modules also have a built-in Load Equalizer™ which will allow ANY style of light, LED, halogen or incandescent to operate without any CAN/Bus interference or trouble codes. Perfect for customizing or adding trailers!
-
The IHL-04-A / Brake Eliminator™ is 100% Plug-n-Play and enables customers to have left and right only turn signals, running and brake lights along with license plate illumination and a ground wire. 2018- Up Softail Models with OEM RED Rear Run/Brake/Turn Signals send brake light functionality on the same wire that provides turn signal flashing to the rear turn signals. Using our IHL-04-BO with our complete rear fender harness, you can now separate the functions and run amber turn signals allowing for traditional style rear lighting. These modules also have a built-in Load Equalizer™ which will allow ANY style of light, LED, halogen or incandescent to operate without any CAN/Bus interference or trouble codes. Perfect for customizing or adding trailers!
-
The IHL-04-A / Brake Eliminator™ is 100% Plug-n-Play and enables customers to have left and right only turn signals, running and brake lights along with license plate illumination and a ground wire. 2011-2017 FXS/B, 2012-2017 FLS/S with OEM RED Rear Run/Brake/Turn Signals send brake light functionality on the same wire that provides turn signal flashing to the rear turn signals. Using our IHL-04-B with our complete rear fender harness, you can now separate the functions and run amber turn signals allowing for traditional style rear lighting. These modules also have a built-in Load Equalizer™ which will allow ANY style of light, LED, halogen or incandescent to operate without any CAN/Bus interference or trouble codes. Perfect for customizing or adding trailers!
-
The IHL-04-A / Brake Eliminator™ is 100% Plug-n-Play and enables customers to have left and right only turn signals, running and brake lights along with license plate illumination and a ground wire. 2012-Up Dyna with OEM RED Rear Run/Brake/Turn Signals send brake light functionality on the same wire that provides turn signal flashing to the rear turn signals. Using our IHL-04-A with our complete rear fender harness, you can now separate the functions and run amber turn signals allowing for traditional style rear lighting. These modules also have a built-in Load Equalizer™ which will allow ANY style of light, LED, halogen or incandescent to operate without any CAN/Bus interference or trouble codes. Perfect for customizing or adding trailers!
-
The IHL-04 / Brake Eliminator™ is 100% Plug-n-Play and enables customers to have left and right only turn signals, running and brake lights along with license plate illumination and a ground wire. 2014-Up Street Glides, Road Glides and Ultras send brake light functionality on the same wire that provides turn signal flashing to the rear turn signals. Using our IHL-04 with our complete rear fender harness, you can now separate the functions and run amber turn signals allowing for traditional style rear lighting. These modules also have a built-in Load Equalizer™ which will allow ANY style of light, LED, halogen or incandescent to operate without any CAN/Bus interference or trouble codes. Perfect for customizing or adding trailers!
-
This module is intended to enable a pair of single function lights, (power/ground) to perform as a dual function lights, (high/low and ground). Connect to power, ground, running & brake light wires while the output will have a pair of power wires with running & brake light and a pair of ground wires.