-
Our Plug-n-Play DYNAMIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Dynamic sequential flashing: When the turn signal button is pressed, the first LED will lite up then power off, followed by the second on/off and third on/off before the sequence starts again. This module works perfect with our Royal Flush LED kits! -
Our Plug-n-Play Illuminator™ provides running light functions to the front turn signals for added visibility. This modules also has a built-in Load Equalizer to prevent rapid flashing turn signals. FITS: (Fits all 2014 through 2017 Models, EXCEPT Scout) -
Our Plug-n-Play Victory® Front Run/Turn Module™ provides a running light function to the front turn signals. This module also has a built-in Load Equalizer to prevent rapid flashing turn signals. FITS: (Cross Country 2011 to Current) -
Our Plug-n-Play Illuminator™ PRO-III provides running light, brake light and turn signal functions to the rear turn signals, Running light and Turn Signal functions to the front turn signals, left and right indicator light output and a 11-second self-canceling feature. If you have a custom bike, no other module is needed to wire your ride! FITS: Universal/custom applications. -
The IHL-04-A / Brake Eliminator™ is 100% Plug-n-Play and enables customers to have left and right only turn signals, running and brake lights along with license plate illumination and a ground wire. 2011-2017 FXS/B, 2012-2017 FLS/S with OEM RED Rear Run/Brake/Turn Signals send brake light functionality on the same wire that provides turn signal flashing to the rear turn signals. Using our IHL-04-B with our complete rear fender harness, you can now separate the functions and run amber turn signals allowing for traditional style rear lighting. These modules also have a built-in Load Equalizer™ which will allow ANY style of light, LED, halogen or incandescent to operate without any CAN/Bus interference or trouble codes. Perfect for customizing or adding trailers! -
The IHL-04-A / Brake Eliminator™ is 100% Plug-n-Play and enables customers to have left and right only turn signals, running and brake lights along with license plate illumination and a ground wire. 2012-Up Dyna with OEM RED Rear Run/Brake/Turn Signals send brake light functionality on the same wire that provides turn signal flashing to the rear turn signals. Using our IHL-04-A with our complete rear fender harness, you can now separate the functions and run amber turn signals allowing for traditional style rear lighting. These modules also have a built-in Load Equalizer™ which will allow ANY style of light, LED, halogen or incandescent to operate without any CAN/Bus interference or trouble codes. Perfect for customizing or adding trailers! -
The IHL-04-A / Brake Eliminator™ is 100% Plug-n-Play and enables customers to have left and right only turn signals, running and brake lights along with license plate illumination and a ground wire. 2014- Up XL with OEM RED Rear Run/Brake/Turn Signals send brake light functionality on the same wire that provides turn signal flashing to the rear turn signals. Using our IHL-04-C with our complete rear fender harness, you can now separate the functions and run amber turn signals allowing for traditional style rear lighting. These modules also have a built-in Load Equalizer™ which will allow ANY style of light, LED, halogen or incandescent to operate without any CAN/Bus interference or trouble codes. Perfect for customizing or adding trailers! -
The IHL-04 / Brake Eliminator™ is 100% Plug-n-Play and enables customers to have left and right only turn signals, running and brake lights along with license plate illumination and a ground wire. 2014-Up Street Glide®s, Road Glide®s and Ultra®s send brake light functionality on the same wire that provides turn signal flashing to the rear turn signals. Using our IHL-04 with our complete rear fender harness, you can now separate the functions and run amber turn signals allowing for traditional style rear lighting. These modules also have a built-in Load Equalizer™ which will allow ANY style of light, LED, halogen or incandescent to operate without any CAN/Bus interference or trouble codes. Perfect for customizing or adding trailers! -
The IHL-04-A / Brake Eliminator™ is 100% Plug-n-Play and enables customers to have left and right only turn signals, running and brake lights along with license plate illumination and a ground wire. 2018- Up Softail Models with OEM RED Rear Run/Brake/Turn Signals send brake light functionality on the same wire that provides turn signal flashing to the rear turn signals. Using our IHL-04-BO with our complete rear fender harness, you can now separate the functions and run amber turn signals allowing for traditional style rear lighting. These modules also have a built-in Load Equalizer™ which will allow ANY style of light, LED, halogen or incandescent to operate without any CAN/Bus interference or trouble codes. Perfect for customizing or adding trailers! -
Our hard-wired Load Equalizer is designed to prevent rapid flashing turn signals. This module will produce heat and it is not intended for extended usage in 4-way flasher mode. Hard-Wire Honda Load Equalizer LEQ™ (Fits most Honda motorcycles) -
Our Plug-n-Play Load Equalizer-03 is designed to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. Hard-Wire SUPER Metric Load Equalizer LEQ™ (Fits most metric motorcycles except Honda) -
Our Plug-n-Play STATIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Static sequential flashing: When the turn signal button is pressed, the first LED will lite up followed by the second and third before all (3) shut off and the sequence starts again. This module works perfect with our Royal Flush LED kits! -
Our Plug-n-Play DYNAMIC Sequential RBT/Run-Brake-Turn Signal Module will allow riders to install (3) separate (red) LED turn signals (in the rear of the bike) on the left the right side that will sequentially flash when the turn signal button is pressed. The LED's will also have running light and brake functions with a built in Load Equalizer to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. It comes complete with a color-coded replacement rear fender harness and schematic for easy installation. Dynamic sequential flashing: When the turn signal button is pressed, the first LED will lite up then power off, followed by the second on/off and third on/off before the sequence starts again. This module works perfect with our Royal Flush LED kits! -
Our Plug-n-Play Load Equalizer-03 is designed to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat. Plug-n-Play SUPER Load Equalizer LEQ™ (FLH and FLT CVO and Screaming Eagle 2009-2013) -
Our Plug-n-Play Illuminator™ provides running light, brake light and turn signal functions to the rear turn signals. This modules also has a built-in Load Equalizer to prevent rapid flashing turn signals. Comes with lenses! FITS: (FLH Models from '86-'90 with Factory Style Lenses) -
Our Plug-n-Play Illuminator™ provides running light, brake light and turn signal functions to the rear turn signals. This modules also has a built-in Load Equalizer to prevent rapid flashing turn signals. Comes with lenses! FITS: (FLSTC, FLT, FLHT, FLHR and FLTR 1997-2008 with raised-style lenses)
Product Categories
Wiring Products
Lighting Modules
L.E.D. Lighting
New Products
Clearance
Important Links
My Account
Distributors
Private Label
Shipping
Warranty and Returns
All content property of NAMZ Custom Cycle Products Inc. © 1999-2024 | Privacy Policy | Site Map | Terms of Service